Abra nossa APP de graça!

Aproveite ofertas exclusivas.

Abra APP
Alfawise TL Smoother Módulo Adicional para Impressora 3D
Alfawise TL Smoother Módulo Adicional para Impressora 3D
Alfawise TL Smoother Módulo Adicional para Impressora 3D
Alfawise TL Smoother Módulo Adicional para Impressora 3D
Alfawise TL Smoother Módulo Adicional para Impressora 3D
1/1

Alfawise TL Smoother Módulo Adicional para Impressora 3D - Hera Azul

Veja tradução
R$17.56
4.28
35 Comentários

Cupom:

Promoção:

Suporte ao pagamento COD

Armazém e Taxa

Selecionar
CN-099:Envio entre: Nov 25 - Nov 27

Opções do Produto

Selecionar
Hera Azul

Comentários (35)

Les Thodore
Mar 06,2019
These modules are great. I was looking for something to smooth out the moire patterns, and it just worked as my expected. Most "salmon skin" of my artifacts are gone and the ones that are not are now just barely visible. Super easy to install and the cables are wired properly so you don’t have to waste anytime correcting that. Once I plugged them into the printer I was able to get printing again. The prints have seemed to be more smooth. Such a small price to pay for improving the stability and quality of my prints. Highly recommend.
Ver Mais

Descrição

Principais características:
● O TL Smoother é um módulo adicional para drivers de motor de passo da impressora 3D
● Melhore muito a qualidade de impressão a um baixo custo
● Menor vibração e menor ruído para resultados mais suaves, evitando eficazmente a "pele de salmão"
● A placa fornece diodos flyback (diodos de roda livre) para as saídas do motor
● Plug-e-play, nenhum software extra necessário

Nota: a placa principal da imagem não está incluída.

Especificação

Geral

Marcas: Alfaviar
Modelo: ACS01
Materials: PCB
Suitable for: Acessório
Tipo: Motor de passo

Dimensões e Peso

Peso do Produto: 0,0080 kg
Peso do Pacote: 0,0280 kg
Tamanho do Produto(L x W x H): 8.00 x 6.00 x 1.50 cm / 3.15 x 2.36 x 0.59 inches

Conteúdos do Pacote

Conteúdo do Pacote: 1 x TL Smoother, 1 x Cabo

Alfawise TL Smoother Módulo Adicional para Impressora 3D- Hera Azul


Produtos Recomendados

Produtos Patrocinados

Bônus para novos membros: Cupão de $50
R$17.56

Alfawise TL Smoother Módulo Adicional para Impressora 3D

Cor

Quantidade - +
parcelas: escolha
loading...
loading...
cancelar
loading...
loading...
loading...

Comentários

4.63 *****
  • 26
  • 7
  • 1
  • 0
  • 1
  • Todos ( 35 )
  • ( 2 )
  • ( 0 )
Les Thodore
Mar 06,2019
These modules are great. I was looking for something to smooth out the moire patterns, and it just worked as my expected. Most "salmon skin" of my artifacts are gone and the ones that are not are now just barely visible. Super easy to install and the cables are wired properly so you don’t have to waste anytime correcting that. Once I plugged them into the printer I was able to get printing again. The prints have seemed to be more smooth. Such a small price to pay for improving the stability and quality of my prints. Highly recommend.
Greg Isaiah
Jan 12,2019
I used to be very upset about the salmon skin of my prints, and I tried a lot but nothing good came of it. One of my printer friend told me that the ugly "salmon skin" is due to the instability of alternating current, because the clipping causes vibration of stepper motors, so I need to by a add-on module. I searched on Gearbest and find this, not too expensive, so I quickly decided to buy it. What’s more, it doesn’t need the installation, very convenient, the success is very remarkable, thanks to my friends, thanks to this small product!!
Omar Adela
Apr 01,2019
As the description, this add-on module is plug-and-play setup, no extra software needed, I put it into use in one hour after I received it. It works well with my 3D printer and surely do a good improvement, greatly improved the print quality on my 3D printer. The difference is like night and day. Amazing.Quick shipping, they will help eliminate salmon skin if you cant eliminate it with settings. No need to doubt, it worth the cash, can't ask for more than that. It’s an excellent product, recommend it to you all!!
melih
Oct 08,2019
Üründe ufak bir sorun var oda kabloları ters bağlanmış. Ben Alfawise U30 için denedim sürekli ilgili ekseni ters çalışmasına neden oluyordu. Daha sonra kendim kabloları uzatma aparatında doğru bağlayarak sorunu çözdüm. Böylece gözle görülür cihaz hareketlerinde bir yumuşama var. O anlamda gerçekten faydalı.
Ddo
Jan 28,2019
Les tl-smoother fonctionne très bien mais attention.Au 1er montage, le déplacement des axes de l'imprimante était inversé. Cela n'est pas du au module en lui même mais a la connectique livré avec qui est pour je ne sait quelle raison câblée à l'envers.Après avoir remis les connecteurs correctement, cela fonctionne parfaitement.Qualité de l'impression améliorée sur une alfawise u30.A voir la durée des modules dans le temps.
wack
Jan 06,2019
I put a set of these on my delta printer and so far they are working great. I bought them more for the EMF protection since I sometimes need to move the axis and I don't want to harm the drivers, but they may have made some slight difference in print quality also.
Thorsten Schumacher
Jun 08,2019
Ich habe die TL-Smoother noch nicht getestet aber was ich sagen kann ist diese miserable verpackung, ein smoother ist top verpackt der andere sieht mir eher so aus als wäre er schon mal benutz worden, besonders weil eine ecke schon abgebrochen war als ich diese bekommen habe
Jey
Jan 15,2019
The boards arrived in working condition, but ultimately failed to improve my prints. This is not a fault of the boards, they just didnt suit my needs, so back they went.
R Kiever
Jan 09,2019
I did side by side comparisons with this connected / disconnected and couldn't tell the differences in the prints. It doesn't seem to do anything for my PrintrBoard.
Mail
Dec 19,2018
These things worked wonders to get rid of the salmon skin problem I was having with my Tevo Tornado. Smooth prints from here on out!
Ver Mais
Ver Mais
Ver Mais