Veja tradução
R$79.89
4.54
13 Comentários
V2S Caneta de Impressão de Impressora 3D - Hera Azul
Cupom:
Promoção:
Suporte ao pagamento COD Armazém e Taxa
SelecionarCN-099:Envio entre: Mar 29 - Mar 31
Opções do Produto
SelecionarHera Azul
Comentários (13) Ver Mais
Awakend
Mar 23,2019
- Not bad pen. With no any clear quality defects. In general woks nice, but some scrapy, scrapy noise may be uncomfortable. Operates easily (exactly as in the instruction). Switch pen (hold forward 2 secs), select filament type if need, start (short press) heater and when green lit feed wire (short forward) and adjust speed with slider (to stop feeding press forward again). Pen feeds three speeds in fact: slowly-slowly, fast or faster. Quite curiously with no habit. Much thanks.
Discussão
Veja mais
Por que não extrusão de plástico suficiente? 
1. Diâmetro incorreto do filamento;
2. Aumente o multiplicador de extrusão. The solution to under-extrusion (not extruding enough plastic)
Descrição
Principais características:
● Pode desenhar em um papel ou no ar
● Desenhe o modelo estereoscópico usando rosca PLA (incluída)
● O fio de plástico aquecido se espreme e instantaneamente endurece
● O melhor ponto de fusão de uma cabeça de caneta, nenhum dano de aquecimento
● Muito leve, fácil de segurar e manusear
● Alimentado por USB para carregar facilmente
● Concha ABS para uso durável
● Ideal para crianças e adultos
● Pode desenhar em um papel ou no ar
● Desenhe o modelo estereoscópico usando rosca PLA (incluída)
● O fio de plástico aquecido se espreme e instantaneamente endurece
● O melhor ponto de fusão de uma cabeça de caneta, nenhum dano de aquecimento
● Muito leve, fácil de segurar e manusear
● Alimentado por USB para carregar facilmente
● Concha ABS para uso durável
● Ideal para crianças e adultos
Especificação
Dimensões e Peso | Peso do Produto: 0,1800 kg Peso do Pacote: 0,1800 kg |
|---|---|
Lista do Pacote | Conteúdo do Pacote: 1 x Caneta de Desenho 3D, 1 x Caixa, 1 x Cabo USB, 1 x Manual de Inglês e Chinês, 1 x PLA Fio |
Ver Mais
Produtos Recomendados
Produtos Patrocinados
loading...
loading...
loading...
loading...
4.54 *****
- 7
- 6
- 1
- 0
- 0
- Todos ( 13 )
- ( 6 )
- ( 2 )
Awakend
Mar 23,2019
- Not bad pen. With no any clear quality defects. In general woks nice, but some scrapy, scrapy noise may be uncomfortable. Operates easily (exactly as in the instruction). Switch pen (hold forward 2 secs), select filament type if need, start (short press) heater and when green lit feed wire (short forward) and adjust speed with slider (to stop feeding press forward again). Pen feeds three speeds in fact: slowly-slowly, fast or faster. Quite curiously with no habit. Much thanks.
Adam
Oct 02,2020
- It works well! No clogs or anything. It took a while for me to find out that pushing the button again paused it, but once I realized that it got a lot easier to use. Note that if you get more filament, you may have to play with the temperature. Even if it melts at 190, 210 might be better for adhesion and workability. Also, if you have any glass surfaces, those work well if you prep the surface with a glue stick.
Arkamon
Apr 11,2019
- Produit fonctionnel, je me suis amusé 2h avec sans rencontrer de problème.Le bouton slider n'est pas idéalement placé pour commander la vitesse d'extrusion mais cela n'empêche en rien le bon fonctionnement.La pointe de la tête est chaude mais n'est pas brûlante ce qui limite les accidents.Selon moi, pourrait convenir à un enfant de 6-7ans minimum, sous surveillance des parents évidemment.N'importe quel type de PLA (1.75mm) convient.Satisfaisant dans l'ensemble, surtout pour ce prix !
Den
Apr 11,2019
- 3D ручка для печати для 3D принтера V2S.Хорошая 3D ручка для печати ABS и PLA пластиком. Хорошее начало для ознакомления детей с технологией 3D печати.Мой обзор - https://youtu.be/TjVfoqIEsLA
Tomas
Aug 06,2019
- It's good 3d pen for start with 3d drawing not as good as professional 3d pens but it's enough for me. It's easy to operate with buttons speed is not very good and it makes wierd sound but it's normal function of pen.
wf
Jun 17,2019
- Some tests are needed in order to get used to the way this things work. This is not isolated to this particular brand/model but valid for all 3d pens.
Vasilis
Jul 27,2019
- Nice 3d pen it came really fast its nice for people that now start with 3d printing (kind difficult at the begining but you learn it) its nice to cover up holes of your original 3d printed object
Boss
Jan 03,2019
- Great quality product. My son was really happy getting this product for Christmas. I think you need a little bit of trainig to get used to creating with this product. Its kind of hard.
Matthew
Dec 10,2020
- Item arrived with huge delay but I guess it was due to lockdowns everywhere because of the pandemic.Tries a few times and works well, so I’m satisfied, and recommend you the seller.
kajtepabriga
Jan 30,2019
- Worked as described. I don’t have another one to compare it to, but for the price this is a great craft tool for the kids.
Ver Mais